Pakistan: +92 321 4466539China: +86 131 2867 6504
Home/Machines/Auxiliary Equipment
Complete Moulding-Room Support

Auxiliary Equipment

A moulding machine is only one part of a production line. HassanPlas supplies the complete auxiliary package — chillers and mould temperature control, granulating and recycling, drying and material conveying, colour mixing, and servo robot automation — sized and matched to your injection and blow moulding machines.

01 — Cooling & Temperature Control

Chillers, mould temperature & cooling towers

Stable mould and process temperature is the foundation of cycle time and part quality. Our cooling line runs from 3 HP to 60 HP water- and air-cooled chillers, oil/water mould temperature controllers, and matched cooling towers.

Water-cooled screw chiller
LXT-WC Series

Water-Cooled Chiller

Shell-and-tube condenser, stainless-steel evaporator and anti-corrosion tank. 3–60 HP, 5–30 °C set range, microcomputer control.

Air-cooled screw chiller
LXT-AC Series

Air-Cooled Chiller

Self-contained air-cooled units needing no cooling tower. 1–60 HP, built-in low/high-pressure protection and overload cut-out.

Mould temperature controller
LXT-SCT Series

Mould Temperature Controller

Water and oil-type single and dual-temperature units with PID control — holds mould temperature for consistent shrinkage and surface finish.

Square cooling tower
Cooling Tower

Square Cooling Tower

FRP counter-flow towers that reject heat from water-cooled chillers — low noise, corrosion-resistant fill and efficient water distribution.

02 — Granulating & Recycling

Crushers, shredders & granulators

Recover sprues, runners, rejects and bulky parts back into usable regrind. Hardened blades, screen-controlled particle size and heavy steel construction for continuous in-line or central recycling.

Powerful plastic crusher
Crusher

Powerful / Heavy-Duty Crusher

Beside-the-press and central crushers with claw and flat blade sets for sprues, runners and thick-wall parts.

Single-shaft shredder for hollow materials
Shredder

Hollow-Material Shredder

Single-shaft shredders for drums, large hollow mouldings, pipe and bulky purge — low-speed, high-torque cutting.

Multi-knife edge grinder with double shaft
Double Shaft

Multi-Knife Edge Grinder

Double-shaft multi-knife grinder for trim edge and film scrap — quiet, low-dust operation with cyclone recovery option.

PC series powerful granulator
PC Series

Powerful Granulator

Multi-blade granulators with interchangeable screens for uniform regrind sizing — ready for two-material proportioning back into the process.

03 — Drying & Material Conveying

Loaders, dryers & conveying

Get dry resin to the throat, automatically. From vacuum hopper loaders and hopper dryers to three-in-one dehumidifying dryers for PET and engineering resins, plus screw feeders and belt conveyors for finished product.

Multi-hopper vacuum auto loader
Auto Loader

Multi-Hopper Auto Loader

Vacuum hopper and powder loaders that feed resin and regrind to multiple machines from a central source.

Hot-air hopper dryer
Hopper Dryer

Hot-Air Hopper Dryer

Stainless-steel drying hoppers with PID hot-air heating for everyday hygroscopic resins — mounted on the machine or standalone.

Three-in-one dehumidifying dryer
LXT-CDY Series

Dehumidifying Dryer (3-in-1)

Integrated dehumidifier, dryer and loader for PET, PA, PC and PBT. 25–200 kg, low dew-point air, PID / PLC touch control.

Screw feeder
Screw Feeder

Screw Feeder

Spiral screw feeders for reliable, dust-controlled loading of granules and powder into hoppers and mixers.

Inclined belt conveyor
Conveyor

Belt Conveyor

Inclined belt conveyors for finished bottles and mouldings — adjustable speed and height, take-away from the press.

Volumetric colour doser and mixer
LXT-SD Series

Colour Doser & Mixer

Volumetric and weighing colour/masterbatch dosers — single or double colour, microprocessor control and screw-driven dosing.

Three and five-axis servo beam robots
04 — Automation

Servo robot arms

Take-out robots remove preforms, parts and runners straight from the mould for unattended, repeatable production.

  • Three-axis servo beam robots for standard top-entry part removal on small to mid machines.
  • Five-axis servo beam robots for sprue picking, insert loading and complex part orientation.
  • Telescopic / large-tonnage models matched to clamping force, with fast removal and full-cycle times tuned to your moulding machine.
  • Vacuum & gripper end-of-arm tooling, mould-area confirmation and safety interlocks as standard.

Specify a complete production line

Tell us your moulding machines, resin and output. HassanPlas will size the matched chillers, dryers, granulators, conveying and automation, and quote it as one landed package — installed and commissioned.

Request a Quote →